Table of Contents
Advertisement
MC55 AT Command Set
7.23 AT^SLCC
Write Command
AT^SLCC= [
]
<n>
Response(s)
OK
ERROR
+CME ERROR: <err>
PIN
ASC0
ASC1
MUX1
%
%
%
Reference(s)
Siemens
Unsolicited Result Code
Unsolicited Call Status information
if the list of current calls is empty:
^SLCC:
if one or more calls are currently in the list:
^SLCC: <idx>, <dir>, <stat>, <mode>, <mpty>,
<number>, <type>[, <alpha>]]
[^SLCC: <idx>, <dir>, <stat>, <mode>, <mpty>,
<number>, <type>[, <alpha>]] ][... ]^SLCC:
URC "
" displays the list of current calls as displayed with the execute command
^SLCC
played in the state it has at the time of display, not in the state it had when the signal was generated.
The URC's occurrence indicates call status changes for any of the calls in the list of current calls.
Please refer to
Call Status Information
this URC.
Event reporting can be enabled separately for each interface. Interface settings are saved with
displayed with
. Additionally, The URC presentation mode for the interface must be configured with
AT&V
.
AT+CMER
Depending on the value of
command
and
AT^SLCC
•
when a state transition ends in state "active" or in state "unknown" (if
•
when any state transition (including transitions beginning or ending in state "unknown") occurs in the list of
active calls, or when a traffic channel is established (if
If multiple displays of identical list configurations occur, this happens because of short intermediate states of the
list, that have already been overridden by new transitions and states. Thus, it is guaranteed that the configuration
displayed is always the current configuration at the time of the last display.
The list of active calls displayed with this URC will always be terminated with an empty line preceded by prefix
''^SLCC: '', in order to indicate the end of the list.
Command Description
The read command returns an indication whether event reporting is active for the current interface.
The exec command returns a list of current calls of ME. If command is successful, but no calls are available, no
information response is sent to TE.
MC55_ATC_V01.05
Confidential / Released
MUX2
MUX3
%
%
%
and
setting
AT^SCFG
<sucs>
)
AT+CMER
Page 171 of 469
<traffic channel
<traffic channel
for further information about the configuration of
AT^SCFG
, Indicator "
" will be issued (if configured with write
^SLCC
AT^SCFG
setting
AT^SCFG
<sucs>
s
m
obile
assigned>[,
assigned>[,
. The list is dis-
AT^SLCC
and can be
AT&W
setting
="restricted")
<sucs>
="verbose").
2/10/04
Advertisement
Table of Contents
