Siemens MC55 Command Set page 407

MC55 AT Command Set
16.11 AT^SNFI
Notes
• Write command works only in audio modes 2 to 6!
• Read and write options of this command refer to the active audio mode.
• The range of
<inCalibrate>
= 65535 will cause a failure.
brate>
• Changed values have to be stored with
• Attention! When you adjust audio parameters avoid exceeding the maximum allowed level. Bear in mind that
exposure to excessive levels of noise can cause physical damage to users!
• The default values are customer specific.
MC55_ATC_V01.05
Confidential / Released
is up to 65535 but will be suppressed to 32767. Values above
.
AT^SNFW
Page 407 of 469
s
m
obile
<inCali-
2/10/04