Telephone System Configuration - Toshiba Strata CIX GVPH Programming Manual

Maintenance and Troubleshooting
Tools
CAUTION!
7. When the restore is complete, press Y to reboot GVPH. The UADM2 Admin PC
returns to the C:\Uadmin20 DOS prompt. When the GVPH status light begins
flashing red, GVPH is operational.
You cannot reconnect to GVPH using UADM2 Admin until the GVPH status light is
Note
flashing red. Any attempt prior to that time fails.

Telephone System Configuration

CAUTION!
This function modifies the following codes/integration patterns:
•
Telephone System Dial Codes – Stratagy performs certain actions on your telephone
system by using defined telephone system dial codes. To define the dial codes, you must
modify the telephone system dial code parameters.
•
System Integration Patterns – Enables modification to the telephone system integration
patterns.
The telephone system configuration is set using the pbx_type parameter (see
Note
"pbx_type" on page 1-13
With this option, preset dial codes for other manufacturers' systems can be enabled or
modified. As an example:
1. Press 1 to Edit System Dial Codes.
2. From the Telephone System Dial Codes screen, delete the suffix –1 from the line What to dial
AFTER dialing the User ID extension
3. Press Esc.
4. Press 2 to save your changes without restarting IVP8.
Select a Predefined Dial Code
1. From the Tools menu, press 4. The Telephone System Configuration screen displays.
2. From the Telephone
System Configuration
screen, press 1. The
Telephone System Dial
Codes screen displays
(shown right).
3. To select a default setting,
use the arrow keys (↑↓)
and/or Page Up and Page
Down keys to highlight your
selection and press Enter
8-6
If GVPH is not rebooted, all ports remain in an off-hook condition.
Take care when making changes and then restarting Stratagy. In some cases,
if invalid information has been entered, Stratagy may not reboot correctly.
If your Toshiba telephone system is configured for tone first, you would:
for details).
.
Strata CIX40 Voice Processing Programming Manual 7/06