Retrieve Trace File - Toshiba Strata CIX GVPH Programming Manual

Maintenance and Troubleshooting
Tools

Retrieve Trace File

Important!
This function copies the trace data log file (TRACE.OUT) to the UADM2 Admin PC's hard
drive. As part of this function, a new Trace Filter Setup screen (see
enables you to specify the filtering rules for selecting the desired trace records.
After UADM2 Admin filters the trace data, it decodes and expands the data into records
containing the information requested by you in the Trace Filter Setup screen.
1. From the Tools menu, press 7.
2. The trace file name defaults to
TRACE.OUT. From the Retrieve
Trace File screen (shown at
right), press Enter.
3. Enter the directory where you
want to copy the file. The default
is: C:\UADMIN20.
If you need a different directory, type over the default. Press Enter. Be sure to enter
the complete path. If the directory already exists, you are given the option of entering a
new directory or overwriting the file. The Trace Filter Setup screen displays (see
Figure 8-1
4. Select the items you want included in the TRACE.OUT file. Refer to the field
descriptions on
5. When you are finished, press Alt+e.
Once the data has been
expanded, voice
processing copies the file
to the directory/file
specified in
procedure. A dialog
status box displays
(shown at right).
When the copy is
complete, another status
box displays (shown at
right):
You can use any text editor to review the file.
8-14
Voice processing must be running in Trace mode. See
UADM2 Admin's Main Menu" on page 1-8
on page 15).
page 1-15.
Step 3 of this
for detailed instructions.
Figure 8-1
UAMIN20
Strata CIX40 Voice Processing Programming Manual
"Shutdown Using the
on page 15)
3253
3254
7/06