Fixed Length User Ids - Toshiba Strata CIX GVPH Programming Manual

Parameter

Fixed Length User IDs

The fixed length of a User ID is based on its first digit.
fixed_len0
fixed_len1
fixed_len2
fixed_len3
fixed_len4
Strata CIX40 Voice Processing Programming Manual
Maximum digits GVPH expects when a caller dials a User ID beginning with zero.
There is only one User ID mailbox that can have zero as its first digit, and that is
User ID 0. If the value of this parameter is changed to 1, and a caller dials 0 in a
place where a User ID mailbox number is expected, then GVPH immediately
accepts the 0 as the User ID mailbox number and goes to the next processing step.
If the parameter's value is left at 8, then a timeout or pound sign (#) is required to
terminate the User ID.
Possible values: 1~8
Default: 8
Maximum digits GVPH expects when a caller dials a User ID beginning with one.
When changing this value, make certain that it is still possible to log in and send
messages to all existing User ID mailboxes that begin with this digit. For example, if
there are five-digit User ID mailboxes that begin with this digit, then you should not
set the value of this parameter less than five. Check all User ID mailboxes, including
users, guests, and reserved (411, 990, etc.)
Possible values: 1~8
Default: 8
Maximum digits GVPH expects when a caller dials a User ID beginning with two.
When changing this value, make certain that it is still possible to log in and send
messages to all existing User ID mailboxes that begin with this digit. For example, if
there are five digit User ID mailboxes that begin with this digit, then you should not
set the value of this parameter less than five. Check all User ID mailboxes, including
users, guests, and reserved (411, 990, etc.)
Default: 1~8
Default: 8
Maximum digits GVPH expects when a caller dials a User ID beginning with three.
When changing this value, make certain that it is still possible to log in and send
messages to all existing User ID mailboxes that begin with this digit. For example, if
there are five digit User ID mailboxes that begin with this digit, then you should not
set the value of this parameter less than five. Check all User ID mailboxes, including
users, guests, and reserved (411, 990, etc.)
Possible values: 1~8
Default: 8
Maximum digits GVPH expects when a caller dials a User ID beginning with four.
When changing this value, make certain that it is still possible to log in and send
messages to all existing User ID mailboxes that begin with this digit. For example, if
there are five digit User ID mailboxes that begin with this digit, then you should not
set the value of this parameter less than five. Check all User ID mailboxes, including
users, guests, and reserved (411, 990, etc.)
Possible values: 1~8
Default: 8
7/06
Description (continued)
Configure UADM2 Software
System Parameters
2-19