Notification To A Pager On Urgent Messages Only - Toshiba Strata CIX GVPH Programming Manual

Notification to a Pager on Urgent Messages Only

You can program voice processing to light a message waiting light for all messages, while
paging or calling the user offsite when he receives a message marked Urgent. To do this, for
the particular paging Notify record, change the Type field from Normal to Urgent .
To program voice processing to notify a user via his digital pager when he receives a
message marked Urgent is similar to "Notification to a Pager."
Program Example
In the following example:
•
User ID: 405
•
Dial 9 for an outside line
•
The paging system uses the * to designate a "-" in the pager display
! To program the example
Define the Notify record to contain:
Title
<enter title/comment for identification>
Type URGENT
Variable <digital pager's telephone number>
Method
9W(4,T)%V,,W(2,P)-%U#-
9 Dials 9 for an outside line.
W(4,T) Waits up to 4 seconds to hear dial tone.
%V Dials the contents of the Notify record's Variable field. This should be the digital pager's
telephone number.
,, Pauses 4 seconds (2 seconds x 2).
W(2,P) Waits up to 2 rings for the pager/beeper to answer.
- Pauses 0.5 second to enable the pager's answer confirmation tones.
%U Relays the User ID.
# Dials # to end call.
- Pauses 0.5 second.
How It Works
When voice processing receives an Urgent call for this User ID, voice processing:
1. Dials the user's digital pager's telephone number.
2. When the pager answers, voice processing relays the User ID.
For this example, the following displays on the pager: 405.
Strata CIX40 Voice Processing Programming Manual 7/06
Customization Examples
Notify Menu Examples
6-13