Toshiba Strata CIX GVPH Programming Manual page 30

Configure UADM2 Software
System Parameters
Parameter
db_locking
defaults_box
dir_play_uid
diskwarn
dss_active
dtmf_dly
2-8
NOT SUPPORTED
Designates the User ID Defaults Box voice processing uses for the default values
when creating a new User ID. The field values in the Defaults Box User ID are
copied into a new User ID upon initialization.
•
User's Information fields are not copied. The User ID field contains the new
User ID you specified.
not defined. If a Security Code
of the User ID as the default.
•
Since guests can only access the User ID that created it and other guests
of that User ID, voice processing defines
mailbox that created it. For example, if the Guest User ID was created by
User ID 76, then Group 1
•
All other Users Menu Options and Group/Chains fields are copied. All
Notify and Auto records are copied.
•
Define the Defaults Box settings before creating User IDs. This initializes
all new User IDs with a minimum number of settings. This is useful for
setting default settings such as message light On/Off.
Except for Group field values, this parameter operates in the same manner as the
guest_defaults parameter.
Possible values: valid User ID
Default: 997
Directory search feature plays the User ID of the mailboxes that it finds.
True: If a name recording is available, the caller hears both the name recording
and the digits for that person's User ID. If a name recording is not
available, just the digits play.
False: If a name recording is available, the caller hears only the recording. If there
is no name recording, voice processing does not present the entry.
Possible values: true, false
Default: true
Percentage threshold voice processing uses for causing a Disk Notify to execute.
This is a remaining percentage threshold.
Example: To have voice processing notify you when the remaining flash ROM
space falls below 20%, use a value of 20.
For voice processing to notify a user (usually the System Administrator) when flash
ROM space is low, create a Notify record with the Type field set to DISK (see
Menu" on page 1-27).
Possible values: 1~99
Default: 5
NOT SUPPORTED
Controls the time between DTMF tones when voice processing is dialing.
0: The time is country-dependent (50 ms in the US, 80 ms in the UK). This is
appropriate for almost all cases.
Possible values: 0, 3~19 (units of 10 ms)
Default: 8
Description (continued)
, , and
Comment Extension
is defined, voice processing uses it instead
Group1
's value is 76.
Strata CIX40 Voice Processing Programming Manual
fields are
Directory Name
as the User ID of the
"Notify
7/06