Automatic System Recovery - Toshiba Strata CIX GVPH Programming Manual

MSG.LOG
If you need to check actions related to specific types of messaging, you can enable MSG.LOG
in the System Configuration file. In this file, GVPH logs message activity for every mailbox
that checks for messages along with the DTMF entered.
!
To enable MSG.LOG
1. From the Tools menu, press 6. The system configuration file displays. The parameters
are listed in alphabetical order.
2. Enable the msg_log parameter by removing the # sign in the string:
#set msg_log 'MSG.LOG'
See Chapter 2 – Configure UADM2 Software
3. Press ESC. The GVPH System Config screen displays.
4. From the GVPH System Config screen, press 1 to save your changes. UADM2 Admin
transmits the file to the GVPH.
5. When complete, press any key to continue. The system starts logging the information
to the MSG.LOG file after GVPH restarts. The DOS prompt displays.
6. (Optional) Restart UADM2 Admin.
! To copy MSG.LOG
1. From the Tools menu, press 8. The Filecopy screen displays (see
details).
2. Using the Filecopy option, copy the MSG.LOG file to the UADM2 Admin PC's hard
drive. You can view it using any common text editor.
You must specify the correct source directory and file name: \Stratagy\MSG.log
Note
ScanDisk (Not Supported)

Automatic System Recovery

To receive notification of the unsuccessful startup, you must set the Notify Menu for User ID
Mailbox 999 to "Panic" notification type.
Strata CIX40 Voice Processing Programming Manual
for instructions.
7/06
Maintenance and Troubleshooting
Troubleshooting
page 1-16 for
8-23