Toshiba Strata CIX GVPH Programming Manual page 37

Parameter
tape_length
timestamp_forwards
tmo_2digit_menu
tmo_blank
tmo_dtmf
tmo_dtmf_login
tmo_hold
Strata CIX40 Voice Processing Programming Manual
When a User selects option 1 (Play Messages), and then 78 (continuous play) or
76 (continuous delete), this parameter defines the total number of minutes to play
or delete. Usually defines the length of one side of a tape that might be used for
recording a set of messages in a User ID.
Possible values: 00, 10~99 (minutes). Setting the value to 00 disables the
Playback and Delete Continuous features.
Default: 30
Controls the date/time stamp the system uses on a forwarded message.
True: Uses the date/time that the message was forwarded.
False: Uses the original date and time the message was first recorded.
Possible values: true, false
Default: true
Amount of time voice processing waits to receive the second digit after receiving the
first digit of a two-digit menu selection.
Example: When playing a message,
replay the current message. If the user presses
this time elapses, voice mail processes the digit entered and rewinds 5 seconds.
Possible values: 10~99 (units of 100 ms)
Default: 12 (1.2 seconds)
Total number of minutes voice processing waits before blanking the Main Menu
screen to prevent screen burn-in.
Note This parameter only blanks the screen if the current screen is the Main Menu.
The advertising parameter contains the string that displays when the Main Menu
screen is blanked.
Possible values: 0 (disabled), 1~99 (minutes)
Default: 5
Amount of time voice processing waits to determine the caller has finished entering
DTMF digits (provided the caller does not press
Possible values: 10~99 (units of 100 ms)
Default: 12 (1.2 seconds)
Amount of time voice processing waits to determine the caller has finished entering
DTMF digits (provided that the caller does not press
and security code during the log in process.
Possible values: 10~99 (units of 100 ms)
Default: 20 (2 seconds)
Number of seconds before voice processing attempts to transfer a call after the
*
caller has pressed to hold for a busy extension.
*
When a caller presses to hold for a busy extension, voice processing plays a file
called C:\Stratagy\HOLD.VOX and then attempts to transfer the call. If that file is
missing, voice processing is silent for the number of seconds specified by this
parameter.
Note To have callers hear a specialty recording while on hold, record over
HOLD.VOX by accessing the System Administration Menu. See the System
Administrator Guide for details.
Default: 20 (seconds)
7/06
Description (continued)
*
means rewind 5 seconds, while
*
and doesn't enter the 1 until after
#
).
#
) when entering the User ID
Configure UADM2 Software
System Parameters
*
1 means
2-15