Toshiba Strata CIX GVPH Programming Manual page 18

Access and Use UADM2 Admin
System Shutdown
Important!
3. Enter the security code (the default is 983997) and press #. All inactive channels are
taken off-hook. All active channels are given a 60 second time delay to complete
processing the current activity. After 60 seconds, they are disconnected and the
system shuts down.
The GVPH is completely shut down when the status light is Out and all port LEDs
Note
are On.
Important!
Shutdown Using the UADM2 Admin's Main Menu
1. From UADM2 Admin's Main Menu, select Shutdown by pressing Alt+s. UADM2 Admin
asks for the password.
2. Enter the password (the default is Stratagy) and press Enter. The screen enables
you to select one of the following options:
•
Shutdown and Restart CURRENT Version — Restarts voice processing.
•
Shutdown and Trace CURRENT Version — Shuts down, then restarts voice processing
in the TRACE mode (TRACE.OUT file is created) on GVPH's flash ROM memory. See
"Trace" on page 1-22
•
Shutdown and Start NEW Version — Restarts voice processing, if selected.
•
Shutdown and Start OLD Version — Restarts voice processing, if selected.
•
Shutdown, SCANDISK, and Restart — Restarts voice processing, if selected.
•
Shutdown and STOP for power off — Takes voice processing off-line and does not
restart it.
Notes
•
•
•
Backup and Shutdown for power off — Takes voice
restart it.
greetings and all message files to the onboard ROM chip.
CAUTION!
3. From the Shutdown Menu, highlight your selection and press Enter.
4. If you chose the "Shutdown and STOP for power off" option, voice processing asks
you to confirm the shutdown. Type Y to confirm. The DOS prompt (C:\Uadmin20)
displays.
1-8
You must wait until the entire prompt has been played before entering the
security code. If the code is entered prior to the completion of the prompt, the
shutdown does not occur.
For security reasons, you should change the default security code.
for details.
This option is not available when accessing the GVPH remotely.
The GVPH is completely shut down when the status light is Out and all port LEDs are On.
This option will backup the contents of the SRAM including the database, names,
This option takes 32 minutes to complete. Do NOT power off the GVPH during
this procedure.
processing
Strata CIX40 Voice Processing Programming Manual
off-line and does not
7/06