Toshiba Strata CIX GVPH Programming Manual page 160

Maintenance and Troubleshooting
Tools
Table 8-2 Telephone System Dial Codes - Definitions and Settings
# Dial code to put a caller on transfer hold:
The code Stratagy sends the telephone system, before attempting to transfer a call to an extension, to put the
current call on "transfer hold" and send the transfer (or intercom) dial tone.
Typical value:
# Dial code to use when there is no transfer dialtone:
The code Stratagy dials to return to the caller when:
Stratagy is configured to verify transfer dial tone exists before attempting to transfer a call to the requested
extension
–and–
transfer dial tone is not available.
When this occurs, Stratagy treats the attempted transfer the same as a busy extension.
Typical value:
# Dial code to return to caller after Ring No Answer:
The code Stratagy dials, during supervised call transfers, to request the telephone switch reconnect the caller to
Stratagy when:
The attempted extension rings
–and–
does not answer within a specified number of rings (configurable per User ID in Users Menu Maximum Rings
field).
Typical value:
# Dial code to return to caller when there is a Busy:
The code Stratagy dials, during supervised call transfers, to request the telephone switch reconnect the caller to
Stratagy when the extension is busy.
Typical value:
# Dial code to use after a call screening reject:
The code Stratagy dials, during supervised call transfers, to reconnect the caller and play the User ID's current
greeting when:
Call Screening is On
–and–
the extension called rejects the caller.
Typical value:
# Dial code to connect the caller to the extension:
The code Stratagy dials, during supervised call transfers, to complete the call transfer after:
Detecting an answer at the called extension
–or–
the extension called accepts the call when Call Screening is On.
Typical value:
8-8
F
- (hookflash)
F-
(hookflash)
F-
(hookflash) - No change required
F- (hookflash) - No change required
F-
(hookflash) - No change required
H
(hang up) - No change required
Parameter/Description
Strata CIX40 Voice Processing Programming Manual 7/06