Toshiba Strata CIX GVPH Programming Manual page 107

Table 5-2 Replaced Tokens (continued)
Token
Previously accessed User ID—replaced with the User ID previously accessed
Syntax %P
%P
Example
If while accessing User ID 100 a caller enters 222, then while User ID 222 is accessed %P has the
value 100.
Relay page DTMF—replaced with the DTMF digits entered by the caller who invoked RELAY paging
notification. Used mostly for sending a telephone number directly to a User's pager/beeper from his
%R User ID.
Syntax %R
Store value—voice processing has twenty storage tokens (variables) that enable you to input, modify,
retrieve, and output values. Upon each new call, all the variables are initialized to null (no defined
value).
%S0 storage token 0%S10storage token 10
%S1 storage token 1%S11storage token 11
%S2 storage token 2%S12storage token 12
%S3 storage token 3%S13storage token 13
%S4 storage token 4%S14storage token 14
%S5 storage token 5%S15storage token 15
%S0~%S19
%S6 storage token 6%S16storage token 16
%S7 storage token 7%S17storage token 17
%S8 storage token 8%S18storage token 18
%S9 storage token 9%S19storage token 19
Each port has a unique set of twenty %S tokens which do not conflict. Therefore, two different ports
may use the same %S token without disrupting each other's value.
Syntax
Connect time—replaced with the current connect time, i.e., the total number of seconds that the port/
call has been active.
%T
Syntax %T
User ID—replaced with the current User ID number.
%U
Syntax %U
Variable—replaced with the value of the current Notify record's Variable field. Useful for defining
notification templates for User IDs that perform the same type of notification with a difference only in
%V the telephone number that voice processing should dial, e.g., pager/beeper telephone numbers.
Syntax %V
Strata CIX40 Voice Processing Programming Manual
%S0,%S1,%S2,%S3,%S4,%S5,%S6,%S7,%S8,%S9,%S10,%S11,%S12,
%S13,%S14,%S15,%S16,%S17,%S18,%S19
7/06
Description
Token Programming
Replaced or Variable Tokens
5-5