System Configuration; Modify System Configuration Parameters - Toshiba Strata CIX GVPH Programming Manual

System Configuration

Use this function to change voice processing's system options and parameters, define
timeout values and computer configurations, and control per port options. See
Parameters" on page 1-6
Most System Configuration options do not require modification. We recommend that you
modify the system password immediately. All other options have default values, but can be
modified as required.
We recommend that you use the Backup Utility initially and periodically to preserve system
data. Before making changes to this selection, ensure you have a current backup. See
on page 1-2 and "Restore Utility" on page

Modify System Configuration Parameters

1. From the Tools menu, press
6. The System
Configuration screen
displays (shown right). The
parameters are listed in
alphabetical order.
The System Configuration
Screen is split into two
areas: the left lists the
actual parameters and their
values, the right lists
context-sensitive help for
each parameter.
2. Highlight the parameter by using the arrow (↑↓)
...or Page Up and Page Down keys. Press Enter.
3. Modify the parameter using the line editor at the top of the screen.
If a line begins with a #, it is a heading or a parameter that is "commented out" and is not
active. To enable a parameter that is commented out, remove the starting # and set the value.
4. Press ESC.
5. From the System Config screen, press 1. The changes are transmitted to GVPH and
GVPH is shut down and restarted. By shutting down and restarting the GVPH, the
changes take effect.
...or 2. The changes are transmitted to GVPH but GVPH is not shut down or restarted.
Until you restart GVPH, the changes do not take effect.
...or 3. The changes you made are cancelled and not saved.
6. If you pressed 1 to save the changes, press any key to reboot. The DOS prompt
displays. To continue, you must re-enter UADM2.
Strata CIX40 Voice Processing Programming Manual
for a list of the parameters, their definitions and default settings.
1-5.
7/06
Configure UADM2 Software
System Configuration
"System
"Tools"
2-5