Toshiba Strata CIX GVPH Programming Manual page 159

...or to cancel without selecting a dial code, press Esc.
If the CIX is configured for Tone First ringing remove the "1-" from "What to do
Note
AFTER dialing the user ID extension". The remaining dial codes do not require any
changes.
4. After making the selection, press ESC. The Telephone System Configuration screen
displays.
5. From the Telephone System Configuration screen, press 1. The changes are
transmitted to Stratagy and Stratagy is shut down and restarted. By shutting down and
restarting Stratagy, the changes take effect.
...or 2.The changes are transmitted to Stratagy but Stratagy is not shut down or
restarted. Until you restart Stratagy, the changes do not take effect.
...or 3. The changes you made are cancelled and not saved.
6. If you pressed 1 to save the changes, press any key to reboot. The DOS prompt
displays. To continue, you must re-enter Stratagy Admin.
Modify a Dial Code
If the telephone system you desire does not appear on the Telephone System Dial Codes
Screen or further modifications to the dial codes are needed, you can modify a dial code
parameter.
1. From the Tools menu, press 4. The Telephone System Configuration screen displays.
2. From the Telephone System Configuration screen, press 1. The Telephone System
Dial Codes screen displays.
3. Use the arrow keys (↑↓) and/or Page Up and Page Down keys to highlight the dial
code parameter and press Enter.
The line appears at the top of the screen.
4. Modify the dial code using the line editor at the top of the screen.
See Table 8-2
settings.
5. After making the change(s), press ESC. The Telephone System Configuration screen
displays.
6. From the Telephone System Configuration screen, press 1. The changes are
transmitted to Stratagy and Stratagy is shut down and restarted. By shutting down and
restarting Stratagy, the changes take effect.
...or 2.The changes are transmitted to Stratagy but Stratagy is not shut down or
restarted. Until you restart Stratagy, the changes do not take effect.
...or 3. The changes you made are cancelled and not saved.
7. If you pressed 1 to save the changes, press any key to reboot. The DOS prompt
displays. To continue, you must re-enter Stratagy Admin.
Strata CIX40 Voice Processing Programming Manual
below for a listing of the dial code parameters and their definitions and
7/06
Maintenance and Troubleshooting
Tools
8-7