Restore Utility - Toshiba Strata CIX GVPH Programming Manual

Restore Utility

CAUTION! Because of possible errors that can be induced through the telephone
network, Toshiba advises that you perform the Restore Utility on site.
The Restore Utility is used to restore previously backed up names, greetings and/or database
from the UADM2 Admin PC to the GVPH.
A database from a GVMU cannot be restored to a GVPH.
Note
Restore the Database(s)/Names/Greetings
CAUTION! GVPH Voice Processing is suspended during the restore procedure. Any
existing connection is broken. For additional information on the Restore
procedure, see the Caution on
1. From the Tools menu,
press 2.
2. From the Restore screen
(shown at right), enter the
selection number. A
second screen displays
requesting the source
directory.
3. The directory defaults to C:\Uadmin20\BACKUP. If you have the file(s) backed up to a
different directory, type over the default. Press Enter.
Notes
Restoring files from the UADM2 Admin PC's floppy disk drive is not supported.
l
Be sure to enter the complete path, including the drive letter.
l
4. (Optional) If you entered selection 2 "Restore Names & Greetings" in
asked to enter a beginning and ending mailbox number. Press Enter after each entry
Leaving both fields blank defines all mailboxes.
Note
...or if you entered selection 3 "Restore Database, Names & Greetings" in
press Enter in the mailbox number fields to leave them blank.
This selection restores the entire database and all names and greetings. You
Important!
cannot restore selective mailboxes.
Before the restore starts, UADM2
Admin calculates the time the
process takes and displays a status
message (sample shown at right).
5. Press Y to restore the files
...or N to cancel the procedure.
You are asked if you want to shut down active voice channels.
6. Press Y to continue.
Strata CIX40 Voice Processing Programming Manual
page 1-3.
7/06
Maintenance and Troubleshooting
Step 2, you are
Step 2,
Tools
3240
8-5