Toshiba Strata CIX GVPH Programming Manual page 76

Menus
Users Menu
Table 4-4 Options Screen Fields (continued)
Lock
Store Messages
Max (Store Messages)
Copy Messages To
Message Volume
4-10
Locks the current Screen Calls setting. The current Screen Calls setting cannot be
changed by the user through the telephone.
On: User is not permitted to access or change the Screen Calls setting through the
telephone.
Off: User can change Screen Calls selection.
Possible values: On, Off
Default: Off (not locked)
Messages and Greetings
Whether voice processing enables the User ID mailbox to store messages.
Certain applications require a User ID mailbox to play information only and not record
messages. To prevent voice processing from taking messages after the User ID's
greeting plays, set Store Messages to No and Copy Messages To to blank.
Yes: This User ID mailbox may store messages.
No: This User ID mailbox may not store messages.
Note
If Copy Message To has a valid User ID, the message is recorded, then stored in
the Copy Message To User ID mailbox.
Possible values: Yes, No
Default: Yes (Store Messages is On)
Maximum message length in seconds a caller is given when leaving a message.
Possible values: 0 (unlimited), 1 ~ 999 (seconds)
Default: 180 (180 seconds = 3 minutes)
User ID mailbox which receives a copy of this User ID mailbox's messages.
Note
Messages can only be copied once. Voice processing does not chain copy to
multiple mailboxes.
If Store Messages is set to Yes, voice processing stores the message in both the
accessed User ID mailbox and the Copy Messages To User ID mailbox.
If Store Messages is set to No, voice processing stores the message only in the Copy
Messages To User ID mailbox.
Certain applications require a User ID mailbox to play information only and not record
messages. To prevent voice processing from taking messages after the User ID's
greeting plays, set Store Messages to No and Copy Messages To to blank.
Possible values: blank, valid User ID mailbox
Default: blank (Copy Messages To is off)
Volume at which messages are played back to the user. This value can be set by the
user through the telephone, using the Play Message Controls.
Possible values: -6 (softest) ~ 3 (loudest)
Default: 0
Strata CIX40 Voice Processing Programming Manual 7/06