Toshiba Strata CIX GVPH Programming Manual page 29

Parameter
begin_rec_prompt
box_idx
box_snd
cancel_busy_hold
clock_sync
cmt_maxlen
connect_tone
console_slot_id
daylight_saving_time
Strata CIX40 Voice Processing Programming Manual
Whether the system says "Begin recording at the tone, ... or hang up" before taking
a message. This also affects the "to re-record press 2" and "to append press 3"
menu selections given after a recording.
True: The system plays the above prompt.
False: The caller only hears a tone.
Possible values: true, false
Default: true
Sets the Directory User ID for all ports or for specified ports. The Directory is a
special mode that enables voice processing to search its User IDs for a match on
the Directory Name fields. For more information about the Directory, see Chapter 9
–Special Greeting User ID Mailboxes.
Example: Define this parameter as box_idx 411 1 to set User ID 411 as the
directory search ID for port 1. If no port is defined, then 411 is enabled
for all ports.
Note Voice processing builds an index file based on information given in the
Directory Name fields. It enables you to use one or more letters to perform
the search, matching all entries possible. For every User ID that matches,
voice processing plays the name recording—which really may play any
recording you want, if available.
Possible values: valid User ID and valid port
Default: 411 – enabled for all ports.
Sets the Direct Message User ID for all ports or for specified ports. The Direct
Message ID enables voice processing to record a message for a User ID without
having to execute the Extension field and/or hear the User ID's greeting. This is
particularly useful for an Operator transferring directly to voice mail.
Example: Define this parameter as box_snd 998 1 to set User ID 998 as the Direct
Message User ID for port 1. If no port is defined, then 998 is enabled for
all ports.
Possible values: valid User ID and valid port
Default: 998 – enabled for all ports.
Enables callers to hold for busy extensions.
True: Callers cannot hold for busy extensions.
Calls proceed as if a Ring No Answer.
False: Callers can hold for busy extensions.
Possible values: true, false
Default: false
NOT SUPPORTED
Number of seconds for recording a list comment for the User parameter of Manage
Your Lists.
Possible values: 1~99 (seconds)
Default: 10
A beep plays when completing a transfer.
True: Voice processing plays a beep when completing a transfer.
False: Voice processing does not play a beep when completing a transfer.
Possible values: true, false
Default: true
NOT SUPPORTED
NOT SUPPORTED
7/06
Description (continued)
Configure UADM2 Software
System Parameters
2-7