Sd-Sdi & Hd-Sdi Digital Video Input/Output Boards - AMX Optima AVS-OP-1616-110 Instruction Manual

SD-SDI & HD-SDI Digital Video
Input/Output Boards
Applicability Notice
This chapter pertains to the following SD-SDI and HD-SDI digital video I/O boards which are used in
pre-configured systems or can be ordered individually for custom systems:
Signal
SD-SDI
SD-SDI
HD-SDI
Signals may only be routed from the inputs on a board to the outputs on the same board because each
board has its own switching matrix.
FIG. 86
SD-SDI and HD-SDI digital video I/O boards
Note: HD-SDI digital video boards can also be used to route SD-SDI digital video signals.
Dual Link HD-SDI
Two HD-SDI boards in the same enclosure can be used to route dual link HD-SDI* if they were ordered
to do so and are wired in conjunction with each other. The configuration file is set up at the factory with
a virtual matrix that routes the first input on the first board simultaneously with the first input on the
second board, the second input with the second input, etc.
* Dual link HD-SDI consists of two HD-SDI signals that switch together in compliance with
SMPTE 372M.
Optima Instruction Manual
Configuration Board Sales #
4x4 FG1046-527
8x8 FG1046-491
8x8 FG1046-590
SD-SDI & HD-SDI Input/Output Boards
SD-SDI
connectors
HD-SDI
connectors
107