Sd-Sdi And Hd-Sdi Digital Video I/O Boards; Applicability Notice - AMX Optima Instruction Manual

SD-SDI and HD-SDI Digital Video I/O Boards

Applicability Notice

FIG. 34
SD-SDI and HD-SDI digital video I/O boards
This chapter pertains to Optima SD-SDI and HD-SDI digital video input/output boards contained in
pre-engineered systems and custom systems. The table below provides information on the types of
digital video boards and their numbers
SD-SDI and HD-SDI I/O Boards
Note: Specifications for these boards are listed on page 60.
Configuration
Note: HD-SDI digital video boards can also be used to route SD-SDI digital video signals.
Dual Link HD-SDI
Two HD-SDI boards in the same enclosure can be used to route dual link HD-SDI* if they were ordered
to do so and are wired in conjunction with each other. The configuration file is set up at the factory with
a virtual matrix that routes the first input on the first board simultaneously with the first input on the
second board, the second input with the second input, etc.
* Dual link HD-SDI consists of two HD-SDI signals that switch together in compliance with
SMPTE 372M.
Optima Instruction Manual
.
SD-SDI 4x4
SD-SDI 8x8
HD-SDI 8x8
SD-SDI and HD-SDI Digital Video I/O Boards
Board Part #
FG1046-527
FG1046-491
FG1046-590
SD-SDI
connectors
HD-SDI
connectors
59