Opening The Netlinx Webconsole - AMX Enova DGX 8 Instruction Manual

Enova dgx digital media switchers
Hide thumbs Also See for Enova DGX 8:
Table of Contents

Advertisement

The WebConsole & Programming Guide – NetLinx Integrated Controllers at www.amx.com provides information on the
following:











Caution: We strongly recommend a Network Administrator set up the system even if DHCP (Dynamic Host
Configuration Protocol), gateways, firewalls, etc. are not being used.

Opening the NetLinx WebConsole

Caution: We strongly recommend that the NetLinx WebConsole interface site be placed inside your network
firewall and that system security be turned on.
To open the NetLinx WebConsole interface:
1.
From the NetLinx Studio Zero-Config tab
select one of the launch browser options. (If the "Enova DGX [8, 16, 32, or 64]" option is not displayed, see the
instructions on page 52.)
The Manage WebControl Connections page opens.
Or
In the address bar of your PC's browser
the instructions on page 52 or contact your Network Administrator).
The PC must be on the same subnet (e.g., 192.168.X.X).
The Manage WebControl Connections page opens.
FIG. 84
The Manage WebControl Connections page (default page)
2.
Complete any necessary configuration of the system.
If the WebConsole does not open, see the "NetLinx WebConsole Troubleshooting" section on page 55.
Note: The WebConsole does not have a Master Connection page since the NetLinx Master is integrated into
the Enova DGX Switcher and is not modifiable.
Instruction Manual – Enova DGX 8/16/32/64 Digital Media Switchers
D:P:S specification
Navigation of the WebConsole user interface
Basic configuration of the system
Firmware upgrades
Options on the WebConsole pages for the System, Master, and devices
NetLinx programming
NetLinx security options
SSL Certificate information for the system
Terminal commands for the Program port and Telnet
IPSec Configuration file
Clock Manager NetLinx Programming API
– Double-click on "Enova DGX [8, 16, 32, or 64]" or right-click and
– Type the IP address and press Enter (to determine the IP address, see
NetLinx® Integrated Control
147

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents