Dvx Webconsole; Accessing The Webconsole; Master Controller Configuration Options - AMX Enova DVX-3150HD-SP Instruction Manual

DVX WebConsole

The DVX features an on-board WebConsole that allows you to configure the device and make various adjustments to audio/video
and system settings. The WebConsole is accessed via a web browser on a PC that has network access to the DVX.
The DVX WebConsole can be divided into two primary parts:
Audio/Video Switcher Configuration Settings


Master Controller Configuration Options



Accessing the WebConsole

From any PC that has access to the LAN that the target DVX resides on:
1. Open a web browser and type the IP Address of the target DVX in the Address Bar.
2. Press Enter to access WebConsole for that DVX. The initial view is the WebControl page.
FIG. 62 displays the Master Configuration Manager - WebControl page.
System/Device info:
System (read-only): indicates the name of the System currently connected
Device: click the down-arrow to select from a list of all devices connected to this Master
Refresh: Click to refresh the Device list
Click to Login (only required if Master Security
and HTTP Access security options are enabled
on the target Master)
Master Configuration Manager - WebControl Page (Initial View)
FIG. 62
Enova DVX-315xHD & DVX-215xHD All-in-One Presentation Switchers - Instruction Manual
Click to access the three main sections of the WebConsole
(initial view = WebControl)
Select this option to show/hide the Online Device Tree
(showing all devices currently connected to this Master)
Audio/Video Configuration
58