Function:goft:source1 - Agilent Technologies InfiniiVision 3000 X-Series Programmer's Manual

:FUNCtion:GOFT:SOURce1

Command Syntax
:FUNCtion:GOFT:SOURce1 <value>
<value> ::= CHANnel<n>
<n> ::= {1 | 2 | 3 | 4} for 4ch models
<n> ::= {1 | 2} for 2ch models
The :FUNCtion:GOFT:SOURce1 command selects the first input channel for
the g(t) source that can be used as the input to transform or filter
functions (if available).
Query Syntax
:FUNCtion:GOFT:SOURce1?
The :FUNCtion:GOFT:SOURce1? query returns the current selection for the
first input channel for the g(t) source.
Return Format
<value><NL>
<value> ::= CHAN<n>
<n> ::= {1 | 2 | 3 | 4} for the 4ch models
<n> ::= {1 | 2} for the 2ch models
See Also •
•
•
Agilent InfiniiVision 3000 X-Series Oscilloscopes Programmer's Guide
(see page 1138)
"Introduction to :FUNCtion Commands"
":FUNCtion:GOFT:SOURce2"
":FUNCtion:GOFT:OPERation"
on page 326
on page 342
on page 340
16
:FUNCtion Commands
341