Sbus<N>:M1553:Base - Agilent Technologies InfiniiVision 3000 X-Series Programmer's Manual

:SBUS<n>:M1553:BASE
Command Syntax
:SBUS<n>:M1553:BASE <base>
<base> ::= {BINary | HEX}
The :SBUS<n>:M1553:BASE command determines the base to use for the
MIL- STD- 1553 decode display.
Query Syntax
:SBUS<n>:M1553:BASE?
The :SBUS<n>:M1553:BASE? query returns the current MIL- STD- 1553
display decode base.
Return Format
<base><NL>
<base> ::= {BIN | HEX}
Errors
•
See Also
•
•
Agilent InfiniiVision 3000 X-Series Oscilloscopes Programmer's Guide
(see page 1138)
"- 241, Hardware missing"
"Introduction to :SBUS<n> Commands"
":SBUS<n>:M1553 Commands"
on page 1099
on page 629
on page 731
27
:SBUS<n> Commands
733