:WAVeform:XREFerence
Query Syntax
:WAVeform:XREFerence?
The :WAVeform:XREFerence? query returns the x- reference value for the
currently specified source. This value specifies the index of the data point
associated with the x- origin data value. In this product, the x- reference
point is the first point displayed and XREFerence is always 0.
Return Format
<value><NL>
<value> ::= x-reference value = 0 in 32-bit NR1 format
See Also
•
•
•
Example Code
•
Agilent InfiniiVision 3000 X-Series Oscilloscopes Programmer's Guide
(see
page
1138)
"Introduction to :WAVeform Commands"
":WAVeform:PREamble"
":WAVeform:XORigin"
"Example Code"
on page 977
on page 961
on page 976
on page 990
32
:WAVeform Commands
991