Measure:npulses - Agilent Technologies InfiniiVision 3000 X-Series Programmer's Manual

20
:MEASure Commands

:MEASure:NPULses

Command Syntax
:MEASure:NPULses [<source>]
<source> ::= {CHANnel<n> | FUNCtion | MATH | WMEMory<r>}
<n> ::= 1 to (# analog channels) in NR1 format
<r> ::= 1-2 in NR1 format
The :MEASure:NPULses command installs a falling pulse count
measurement on screen. If the optional source parameter is not specified,
the current source is measured.
This command is not available if the source is FFT (Fast Fourier Transform).
N O T E
Query Syntax
:MEASure:NPULses? [<source>]
The :MEASure:NPULses? query measures and returns the on- screen falling
pulse count.
Return Format
<value><NL>
<value> ::= the falling pulse count in NR3 format
See Also
•
•
428
(see page 1138)
"Introduction to :MEASure Commands"
":MEASure:SOURce"
Agilent InfiniiVision 3000 X-Series Oscilloscopes Programmer's Guide
on page 406
on page 444