Trigger:runt:source - Agilent Technologies InfiniiVision 3000 X-Series Programmer's Manual

31
:TRIGger Commands

:TRIGger:RUNT:SOURce

Command Syntax
:TRIGger:RUNT:SOURce <source>
<source> ::= CHANnel<n>
<n> ::= 1 to (# analog channels) in NR1 format
The :TRIGger:RUNT:SOURce command selects the channel used to produce
the trigger.
Query Syntax
:TRIGger:RUNT:SOURce?
The :TRIGger:RUNT:SOURce? query returns the current runt trigger source.
Return Format
<source><NL>
<source> ::= CHAN<n>
See Also
•
•
930
(see page 1138)
"Introduction to :TRIGger Commands"
":TRIGger:RUNT:POLarity"
Agilent InfiniiVision 3000 X-Series Oscilloscopes Programmer's Guide
on page 877
on page 928