Search:serial:iic:pattern:data2 - Agilent Technologies InfiniiVision 3000 X-Series Programmer's Manual

:SEARch:SERial:IIC:PATTern:DATA2

Command Syntax
:SEARch:SERial:IIC:PATTern:DATA2 <value>
<value> ::= integer or <string>
<string> ::= "0xnn" n ::= {0,..,9 | A,..,F}
The :SEARch:SERial:IIC:PATTern:DATA2 command specifies the second
data value when searching for IIC events with two data values.
To set don't care values, use the integer - 1.
Query Syntax
:SEARch:SERial:IIC:PATTern:DATA2?
The :SEARch:SERial:IIC:PATTern:DATA2? query returns the current second
data value setting.
Return Format
<value><NL>
<value> ::= integer
See Also
•
•
•
Agilent InfiniiVision 3000 X-Series Oscilloscopes Programmer's Guide
(see page 1138)
Chapter 28, ":SEARch Commands," starting on page 777
":SEARch:SERial:IIC:MODE"
":SEARch:SERial:IIC:PATTern:DATA"
on page 827
on page 830
28
:SEARch Commands
831