Agilent Technologies InfiniiVision 3000 X-Series Programmer's Manual page 1048

35
Obsolete and Discontinued Commands
Discontinued Command
:POWer:SLEW:VALue
SYSTem:KEY
TEST:ALL
TRACE subsystem
TRIGger:ADVanced subsystem
TRIGger:TV:FIELd
TRIGger:TV:TVHFrej
TRIGger:TV:VIR
VAUToscale
Discontinued
Some previous oscilloscope queries returned control setting values of OFF
Parameters and ON. The InfiniiVision 3000 X- Series oscilloscopes only return the
enumerated values 0 (for off) and 1 (for on).
1048
Current Command Equivalent
none
none
*TST (Self Test) (see
none
:TRIGger:TV:MODE (see
page 945)
none
none
Agilent InfiniiVision 3000 X-Series Oscilloscopes Programmer's Guide
Comments
Slew rate values are now
displayed using max and min
measurements of a
differentiate math function
signal.
page 185)
All commands discontinued,
feature not available
Use new GLITch, PATTern, or
TV trigger modes