Sbus<N>:Flexray:baudrate - Agilent Technologies InfiniiVision 3000 X-Series Programmer's Manual

27
:SBUS<n> Commands
:SBUS<n>:FLEXray:BAUDrate
Command Syntax
:SBUS<n>:FLEXray:BAUDrate <baudrate>
<baudrate> ::= {2500000 | 5000000 | 10000000}
The :SBUS<n>:FLEXray:BAUDrate command specifies the baud rate as
2.5 Mb/s, 5 Mb/s, or 10 Mb/s.
Query Syntax
:SBUS<n>:FLEXray:BAUDrate?
The :SBUS<n>:FLEXray:BAUDrate? query returns the current baud rate
setting.
Return Format
<baudrate><NL>
<baudrate> ::= {2500000 | 5000000 | 10000000}
See Also
•
•
672
(see page 1138)
"Introduction to :TRIGger Commands"
":SBUS<n>:FLEXray Commands"
Agilent InfiniiVision 3000 X-Series Oscilloscopes Programmer's Guide
on page 877
on page 669