Save:waveform:length:max - Agilent Technologies InfiniiVision 3000 X-Series Programmer's Manual

26
:SAVE Commands

:SAVE:WAVeform:LENGth:MAX

Command Syntax
:SAVE:WAVeform:LENGth:MAX <setting>
<setting> ::= {{OFF | 0} | {ON | 1}}
The :SAVE:WAVeform:LENGth:MAX command specifies whether maximum
number of waveform data points is saved.
When OFF, the :SAVE:WAVeform:LENGth command specifies the number of
waveform data points saved.
Query Syntax
:SAVE:WAVeform:LENGth:MAX?
The :SAVE:WAVeform:LENGth:MAX? query returns the current setting.
Return Format
<setting><NL>
<setting> ::= {0 | 1}
See Also
•
•
•
624
(see page 1138)
"Introduction to :SAVE Commands"
":SAVE:WAVeform[:STARt]"
":SAVE:WAVeform:LENGth"
Agilent InfiniiVision 3000 X-Series Oscilloscopes Programmer's Guide
on page 607
on page 621
on page 623