Power:harmonics:standard - Agilent Technologies InfiniiVision 3000 X-Series Programmer's Manual

24
:POWer Commands

:POWer:HARMonics:STANdard

Command Syntax
:POWer:HARMonics:STANdard <class>
<class> ::= {A | B | C | D}
The :POWer:HARMonics:STANdard command selects the standard to
perform current harmonics compliance testing on.
• A — IEC 61000- 3- 2 Class A — for balanced three- phase equipment,
• B — IEC 61000- 3- 2 Class B — for portable tools.
• C — IEC 61000- 3- 2 Class C — for lighting equipment.
• D — IEC 61000- 3- 2 Class D — for equipment having a specified power
Query Syntax
:POWer:HARMonics:STANdard?
The :POWer:HARMonics:STANdard query returns the currently set IEC
61000- 3- 2 standard.
Return Format
<class><NL>
<class> ::= {A | B | C | D}
See Also
•
•
•
•
•
•
•
•
•
544
(see page 1138)
household appliances (except equipment identified as Class D), tools
excluding portable tools, dimmers for incandescent lamps, and audio
equipment.
according less than or equal to 600 W, of the following types: personal
computers and personal computer monitors, television receivers.
":POWer:HARMonics:APPLy"
":POWer:HARMonics:DATA"
":POWer:HARMonics:DISPlay"
":POWer:HARMonics:FAILcount"
":POWer:HARMonics:LINE"
":POWer:HARMonics:POWerfactor"
":POWer:HARMonics:RUNCount"
":POWer:HARMonics:STATus"
":POWer:HARMonics:THD"
Agilent InfiniiVision 3000 X-Series Oscilloscopes Programmer's Guide
on page 537
on page 538
on page 539
on page 540
on page 541
on page 542
on page 543
on page 545
on page 546