Search:glitch:polarity - Agilent Technologies InfiniiVision 3000 X-Series Programmer's Manual

28
:SEARch Commands

:SEARch:GLITch:POLarity

Command Syntax
:SEARch:GLITch:POLarity <polarity>
<polarity> ::= {POSitive | NEGative}
The :SEARch:GLITch:POLarity command sets the polarity for the glitch
(pulse width) search.
Query Syntax
:SEARch:GLITch:POLarity?
The :SEARch:GLITch:POLarity? query returns the current polarity setting
for the glitch (pulse width) search.
Return Format
<polarity><NL>
<polarity> ::= {POS | NEG}
See Also
•
•
•
788
(see page 1138)
Chapter 28, ":SEARch Commands," starting on page 777
":SEARch:MODE" on page 780
":SEARch:GLITch:SOURce"
Agilent InfiniiVision 3000 X-Series Oscilloscopes Programmer's Guide
on page 791