System:error - Agilent Technologies InfiniiVision 3000 X-Series Programmer's Manual

:SYSTem:ERRor

Query Syntax
:SYSTem:ERRor?
The :SYSTem:ERRor? query outputs the next error number and text from
the error queue. The instrument has an error queue that is 30 errors deep
and operates on a first- in, first- out basis. Repeatedly sending the
:SYSTem:ERRor? query returns the errors in the order that they occurred
until the queue is empty. Any further queries then return zero until
another error occurs.
Return Format
<error number>,<error string><NL>
<error number> ::= an integer error code in NR1 format
<error string> ::= quoted ASCII string containing the error message
Error messages are listed in
page 1097.
See Also •
•
•
Agilent InfiniiVision 3000 X-Series Oscilloscopes Programmer's Guide
(see page 1138)
"Introduction to :SYSTem Commands"
"*ESR (Standard Event Status Register)"
"*CLS (Clear Status)"
Chapter 36, "Error Messages," starting on
on page 852
on page 168
on page 165
29
:SYSTem Commands
855