Function:goft:source2 - Agilent Technologies InfiniiVision 3000 X-Series Programmer's Manual

16
:FUNCtion Commands

:FUNCtion:GOFT:SOURce2

Command Syntax
:FUNCtion:GOFT:SOURce2 <value>
<value> ::= CHANnel<n>
<n> ::= {1 | 2 | 3 | 4} for 4ch models
<n> ::= {1 | 2} for 2ch models
The :FUNCtion:GOFT:SOURce2 command selects the second input channel
for the g(t) source that can be used as the input to transform or filter
functions (if available).
Query Syntax
:FUNCtion:GOFT:SOURce2?
The :FUNCtion:GOFT:SOURce2? query returns the current selection for the
second input channel for the g(t) source.
Return Format
<value><NL>
<value> ::= CHAN<n>
<n> ::= {1 | 2 | 3 | 4} for 4ch models
<n> ::= {1 | 2} for 2ch models
See Also •
•
•
342
(see page 1138)
"Introduction to :FUNCtion Commands"
":FUNCtion:GOFT:SOURce1"
":FUNCtion:GOFT:OPERation"
Agilent InfiniiVision 3000 X-Series Oscilloscopes Programmer's Guide
on page 326
on page 341
on page 340