Kyocera QCP 6035 Reference Manual page 94

An application that you have installed (if the application allows beaming)
1. Tap to view the Applications Launcher.
2. Tap to open the last Preferences screen you used.
3. Tap the pick list in the upper-right corner and select General.
4. Tap the beside Beam Receive and select On or Off.
1. Locate the entry you want to beam.
2. Tap to open the menus.
3. From the Record menu, tap Beam.
4. Point the infrared port (at the top of the back panel) at the infrared port of the
receiving device.
For best results, the devices should be from 5 to 30 centimeters (approximately
2 to 12 inches) apart, and the path between the two devices must be clear of
obstacles.
5. Wait for the Beam Status dialog to indicate that the transfer is complete before
you continue working on the phone.
TIP:
Tap here.