Kyocera QCP 6035 Reference Manual page 75

Your package includes a cradle for storing
the phone, recharging its battery, and
synchronizing information with your
computer. If you have purchased an extra
battery, you can charge it in the cradle as
well.
To synchronize data between your phone
and your computer, you must connect the
cradle to the computer. If you don't plan to
synchronize data, just plug the power
cable into the cradle and into a power
outlet.
1. Place the sync cradle on a flat surface near your computer.
2. Insert the small round plug of the power cable (a) into the base of the sync cradle.
Use only the power cable that came with your Kyocera smartphone Using any
other charger or AC adapter will invalidate your warranty and may damage the
sync cradle.
3. Plug the other end of the cable into an AC power outlet.
4. To attach the cradle to your computer, first turn off the computer.
5. Plug the data cable from the sync cradle (b) into a serial communications (COM)
port on your computer. The cradle requires a dedicated port; it cannot share a
port with an internal modem, infrared port, or other device.
6. Turn on the computer.