Kyocera QCP 6035 Reference Manual page 193

3. Roll the shuttle down until Settings is highlighted. Then press the shuttle in.
4. Roll the shuttle down until Network is highlighted. Then press the shuttle in.
5. Roll the shuttle down until Data/Fax Calls In is highlighted. Then press the
shuttle in.
6. Roll the shuttle up or down to select an option for incoming calls:
7. Press to return to the previous menu. Press
screen. The banner "DATA ONLY" or "FAX ONLY" appears at the top of the
home screen.
Expect all incoming calls to be voice calls.
Expect the next incoming call to be a fax transmission. Then
return to standard voice mode.
Expect the next incoming call to be a data transmission. Then
return to standard voice mode.
Expect all incoming calls to be fax transmissions until this
setting is changed or the phone power is turned off.
Expect all incoming calls to be data transmissions until this
setting is changed or the phone power is turned off.
to return to the home