Kyocera QCP 6035 Reference Manual page 187

3. From the pick list in the upper right corner, select Network.
4. Tap Details.
5. Tap Script.
When the Login Script dialog opens, the script is blank. It contains only the word
End.
6. Tap the beside End to open the Command list.
7. Tap the command you want from the Command list.
If the command requires additional information, a line appears to the right
where you can enter the information. The following commands are available:
Tells the phone to wait for specific characters from the server before
executing the next command.
Tells the phone to wait for a command prompt before executing the
next command.
Transmits specific characters to the server.
Transmits a carriage return or LF (line feed) to the server.
Tap Details
Tap Script
Add commands
to produce the
script.