Kyocera QCP 6035 Reference Manual page 41

It is easy to adjust the speaker volume, set the microphone to mute, or turn off the
ringer on your Kyocera smartphone.
You can adjust the volume of the ringer or set your phone to blink or vibrate instead
of ringing when you have an incoming call. For example, if you want to silence the
ringer while you are in a meeting, you can quickly do so using either the Silence
Sounds key with the keypad closed or the Preferences screen with the flip open.
With the flip open, you can make many adjustments to the sounds using the Sounds
Preferences screen. You can adjust the phone ringer separately from alert beeps or
other sounds. For example, if you have set an alert for a Date Book event, the phone
will beep at the scheduled time, even if the phone ringer is turned off.
Press the shuttle up or down during a call.
During a call, the word Options appears in the menu bar at the bottom of the screen.
1. Press the shuttle in to display the menu.
There are only three options in the menu when a call is in progress—Phone Info,
Volume, and Mute/Unmute.
2. Roll the shuttle up or down to move through the options. When Mute is
highlighted, press the shuttle in.
The other party does not hear anything you say until you unmute the
microphone. The Mute option at the bottom of the screen changes to Unmute.
3. To unmute the microphone, press the shuttle in when Unmute is highlighted.
1. If the flip is closed, press the Speakerphone
If the flip is open, tap the Speakerphone
2. To turn Speakerphone mode off, press the Speakerphone
Speakerphone icon again.
key.
icon in the minimized Dialer.
key or tap the