Kyocera QCP 6035 Reference Manual page 280

Select Sounds to adjust the volume settings and select the types of
Sounds
sounds you want to hear for ringers and alerts.
Select Ring only, Vibrate only, or Vibrate then ring to signal an
Call Ring/Vibe
incoming call.
Select from five volume settings for the ringer. Roll the shuttle up to
Ringer Volume
hear samples of the sounds. Press the shuttle to select the volume level
you want
Open the flip to select from many ringer sounds or to assign different
Ringer Type
ringers to different categories of calls.
Select Disabled or Enabled to use a different ringer sound when you
Roaming Ringer
are roaming than when you are in your home service area.
Select Off or any of four volume settings for the beep you hear when
Key Beep Volume
you press keys on the keypad.
Select from seven volume settings for the sound in the earpiece. You
Conversation
Volume
hear a sample of each sound.