Kyocera QCP 6035 Reference Manual page 180

If you are using a predefined service template, you will probably only need to enter
your user name and telephone number. If you are creating a new service template,
you will need to provide additional information.
Selecting a connection type
There are different protocols for connecting to the Internet. Protocols are the rules
for managing and transferring data.
1. On the Network Preferences screen, tap Details.
2. Tap the Connection type pick list and select one of the following:
Point-to-Point Protocol
Serial Line Internet Protocol
Compressed Serial Line Internet Protocol
Your ISP or System Administrator can provide the correct connection type. If
you are not sure, try PPP.
Selecting idle timeout
Idle Timeout sets how long the phone waits before dropping the connection with
your ISP or dial-in server after an application closes.
Tap the Idle Timeout pick list and select one of the following:
The phone drops the connection immediately when you switch to
another application.
The phone waits one, two, or three minutes for you to open
another application before it drops the connection.
The PPP or SLIP connection is maintained until you turn off the
phone (or until it times out).