Kyocera QCP 6035 Reference Manual page 27

When the flip is open, you can use the Dialer application as a keypad. You can press
the keys in the Dialer with the stylus or with your fingers.
1. Tap the Dialer
The Dialer has two modes: minimized and full-screen.
You can see more information about the call (for example,
Minimized—
information from the Speed Dial list) in the upper half of the screen, but the
number keys do not appear. The Dialer opens in minimized mode when you
receive an incoming call or message.
You do not see contact information, but the number keypad is
Full-keypad—
large enough to press with your fingers. The Dialer opens in expanded mode
when you tap the Dialer
2. To toggle between these two modes, do the following:
In the minimized Dialer, tap
In the full-screen Dialer, tap
Dialer.
3. If the phone is not already on, tap the Power
4. Tap the keys either with the stylus or your finger to enter the phone number.
If you prefer, you can write the numbers to dial in the Graffiti writing area. If the
phone number is in a memo or note, you can copy it and paste it into the Dialer.
5. Tap .
6. When you have finished your call, tap
7. To close the Dialer and return to the application you were previously using, tap
the icon in the lower left of the screen.
icon.
icon.
to open the full-screen Dialer.
or press the shuttle in to open the minimized
icon.
.