Kyocera QCP 6035 Reference Manual page 192

8. Tap Done.
9. To preset the phone to receive specific types of data calls, tap the
Incoming Calls and select one of the following:
1. Slide the phone into the sync cradle. Do one of the following:
If the sync cradle is attached to the port you use for synchronizing data, turn
off the HotSync Manager on your computer by clicking
system tray. On the menu, choose Exit.
If you are using a data cable and/or a different port than the one you use for
synchronizing data, it is not necessary to turn off the HotSync Manager.
2. At the home screen, press the shuttle in to open the menus.
Expect all incoming calls to be voice calls.
Expect the next incoming call to be a fax transmission. Then
return to standard voice mode.
Expect the next incoming call to be a data transmission. Then
return to standard voice mode.
Expect all incoming calls to be fax transmissions until this
setting is changed or the phone power is turned off.
Expect all incoming calls to be data transmissions until this
setting is changed or the phone power is turned off.
beside
in the Windows