Kyocera QCP 6035 Reference Manual page 89

5. Adjust the following options as needed.
6. Click OK to close the Setup dialog.
For each application, a program called a conduit controls how the records are moved
during synchronization. There are conduits for the Date Book, Address Book, To Do
List, Memo Pad, and Expense applications, as well as System and Install conduits.
In most cases, you won't need to make any changes in the default conduit settings.
However, in the following cases, you must customize these settings:
To overwrite data on either the phone or the Kyocera smartphone Desktop.
To avoid synchronizing a particular type of file because you don't use it.
NOTE
1. Click in the Windows taskbar to open the menu.
2. On the menu, click Custom.
3. Select the appropriate user name from the list at the top of the dialog.
Identifies which port the Kyocera smartphone Desktop software
will use to communicate with the cradle. This selection should
match the port number where you connected the cradle.
The Kyocera smartphone cannot share this port with an internal
modem or other device. If you have trouble determining the correct
port, see HotSync operations, page
Determines the speed at which data is transferred between the
phone and the Kyocera smartphone Desktop software. We suggest
you try the As Fast As Possible rate first, and adjust downward if
you experience problems. This setting allows the phone and the
Kyocera smartphone Desktop software to find and use the fastest
speed.
260.