Kyocera QCP 6035 Reference Manual page 90

4. Select the application in the Conduit list you want to change.
5. Click Change.
The Change HotSync Action dialog appears.
6. Click the direction in which you want to write data, or click Do Nothing to skip
data transfer for an application.
NOTE:
7. Repeat steps 3–6 to change conduit settings for other applications or for a
different user name.
8. Click OK to activate your settings.
There are three methods of exchanging information between two or more Palm
devices. Do not simply synchronize your new phone to copy the data. Some
important settings on the phone will be changed if you do so.
Use this method only if you are transferring data from a Palm device you will not be
using anymore to a new device. If you intend to use both devices on an ongoing
basis, do not use this method, because it gives both devices the same user name. (If
you continue to synchronize two Palm devices with the same user name, serious
synchronization problems may occur.)
NOTE:
1. Synchronize the original Palm device to your computer.
2. On the computer, launch Windows Explorer.
3. Navigate to the C:\Palm directory and open your user folder