Kyocera QCP 6035 Reference Manual page 132

With the ability to define specific start and end times for any event, it's possible to
schedule events that overlap. In this case, any event conflict (time overlap) appears
in the Week View as overlapping bars. The Day View displays bracketed bars to the
left of the conflicting times.
1. Press the Date Book
2. Tap the Month view button at the bottom of the screen.
The Month view screen shows which days have events scheduled. Dots and
lines in the Month view indicate events, repeating events, and untimed events.
3. Tap any day that appears in the Month View screen to move directly to the Day
View screen for that day.
4. Tap the arrows at the top of the screen to move forward or backward a month.
5. Tap Go To to open the Date Picker and choose a different month.
6. When the Month View is on the screen, press the scroll up and scroll down keys
to move between months.
Event conflicts
key.
Month view
Previous month and next month
A dot below the date indicates an untimed event.
A dashed line indicates a daily repeating event.
A dot on the right side indicates an event.
Month view button