Kyocera QCP 6035 Reference Manual page 30

Dial Immediately—Tap this box if you want to place a call directly when
you select a dialable number in any application. For example, if you select a
phone number in a memo or an email message, the phone will dial that
number directly, without asking for confirmation.
Open Dialer—Tap this box if you want to open the Dialer when you select a
dialable number in any application. When the Dialer opens, the number you
selected is already copied there. Tap
first.
5. Tap the check boxes to indicate when you want the Dialer to appear.
For example, put a check mark beside When a call ends if you want the Dialer
to open automatically at the end of each call. Remove the check mark if you do
not want the Dialer to open in that circumstance.
6. When you have finished, tap OK.
You can designate up to 199 phone numbers from your Address Book to be on your
Speed Dial list. You can then call these phone numbers just by pressing the one, two,
or three digit Speed Dial number (1 through 199). Because Speed Dial is linked to the
Address Book, when you change a phone number in the Address Book, it is
automatically updated in the Speed Dial list.
1. Tap to open the Address Book.
2. Tap to open the Address Book menus.
3. From the Options menu, tap Launch Speed Dial.
to dial it, or modify it if necessary