Kyocera QCP 6035 Reference Manual page 261

A soft reset tells the phone to stop what it is doing
and start over again. All records and entries are
retained. This type of reset is usually sufficient to
solve any problem.
1. Turn the phone over. Open the battery door on
the back of the phone.
2. Use the stylus to press the Reset button.
3. Replace the battery cover.
The Palm logo screen appears and remains on
the screen for several seconds while the phone
tests its memory and performs its startup
operations.
You can also perform a soft reset by removing
and reinstalling the battery.
A hard reset tells the phone to start over and to erase all existing data.
CAUTION:
1. With the flip open, turn the phone over. Open the battery door on the back of the
phone.
2. Press and hold down the backlight key on the top of the phone.
3. Keep holding down the backlight key as you do one of the following:
Use the stylus to press the reset pin.
–or–
Remove and reinsert the battery. (Make sure the phone is turned off before
removing the battery.)
4. When the Palm logo appears, release the backlight key.