Kyocera QCP 6035 Reference Manual page 78

3. Press the sync button on the cradle.
4. Wait for a message indicating that the process is complete.
Do not turn the phone on or off or remove it from the sync cradle during
synchronization.
You can synchronize your Kyocera smartphone with your primary computer (the
computer you use on a regular basis) while you are on the road and away from your
office or home. There are three methods for doing this:
Landline Network Synchronization: this allows you to synchronize your
Kyocera smartphone using a remote computer that is on the same network as
your primary computer. Both the remote computer and your primary computer
must have the Kyocera Smartphone Desktop software installed.
Wireless Network Synchronization: this allws you to synchronize your Kyocera
smartphone with your primary computer if your primary computer is on a
network and the network has dial-up access.
Wireless Direct-to-modem Synchronization: this allows you to synchronize your
Kyocera smartphone with your primary computer by using your smartphone to
dial into your primary computer's modem.
Certain conditions must be met before you can perform your first landline network
synchronization:
The Kyocera smartphone already must have been synchronized with your
primary computer. (Your primary computer is the computer that stores all of
your information and that you use on a regular basis.)
The primary computer must have both Local and Network checked in the
HotSync Manager.
The appropriate user(s) must be selected. (In the HotSync Manager, select Setup,
then the Network Tab.)
The remote computer must have the Kyocera Smartphone Desktop software
installed, and must be on the same network as your primary computer.