Kyocera QCP 6035 Reference Manual page 214

1. Tap to view the Applications Launcher.
2. Tap to display the last Preferences screen you
used.
3. Tap the pick list in the upper-right corner and
select Power.
4. To set how long the phone screen remains on when it is not in use, tap the
beside Auto-off after and select one of the following:
The screen remains on as long as the keypad is flipped open,
whether you are using any applications or not.
The screen goes blank or "sleeps" after the specified number of
minutes of nonuse. It "wakes up" automatically when you press
an application button. You can adjust these settings at any time.
If you find that the screen is going blank too frequently, select a
longer time period.
NOTE:
5. If you want the phone to turn on automatically when you reset it, put a check
mark in the Power phone on at reset check box. (This is the default setting.) If
you want to leave the phone turned off until you turn it on yourself, remove the
check mark from this check box.
6. If you want the phone to turn on or off at specific times, put a check mark in the
Auto power phone check box. Then tap the Time on and Time off fields. Enter
the times when you want the phone to turn on and off. Notice that these times
refer to the current day (the next 24 hours).
7. When you have finished, tap Done.